Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Welcome to SGLobangs 2.0. I have decided to do a complete reboot of SGLobangs after finding the previous forum being overran by spammers. However our mission remains the same, and that is to bring you the best deals, promos and contests in Singapore. In other words, the best LOBANG.

Methods to Install and Practise Circular Vibrating Screen

  • Before installation, first check whether the parts complete or damaged according to the packing list, of which the vibrator, if more than 6 months from the date of leaving the factory, have to unpick and wash and assemble again, and change to the clean lubricating oil. Equipment installation according to the installation drawing, including supporting chassis. It must be installed in the horizontal foundation, which should have enough stiffness and strength, bearing all the dynamic and static load of vibrating screen.

    Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:Mobile Diesel Engine Crusher,mini jaw crusher, If you are interested in our products, please contact us freely: sales@daswell.com

    There are lugs in screen box corners, and lifting hole in bearing chassis corners. Lift as required by figure, not directly to hang the whole screen on the vibrator. To ensure that the gap between the screen box and the nonmoving parts, such as hopper and discharge chute (chute), should maintain a minimum of 75 mm. Match for damper springs according to the free height, to make the free height on both sides of the front or the back end equal as possible ensuring the error was less than 5 mm. Screen box installed later, remain screen surface level from left to right, otherwise, the thin plate is needed between the spring seat and the supporting elements. The adjustment and trial run of the circular vibrating screen. The spring must be in state of vertical portable drilling rig, and spring upper bracket and spring contact surface must be level. Use the spring upper bracket fixed on the screen box trunnion after adjusting, and then weld together. Vibrating screen driving direction positioned, stand on the feeding end, face the direction of material flow to observe motor position, you can get the right or left to drive. Ensure the V belt tension have sufficient adjustment amount, and the grooves corresponded by two belt wheels in their own plane.

    After installation adjustment, it should get no-load trial run for not less than 2 h, smooth operation, no abnormal noise, amplitude and motion track mark meeting the requirements, and the highest temperature of the bearing not over 75 ℃. After the no-load trial run qualified, it can be put into the load trial run, and the load test time can be ordered according to the process commissioning requirement. Before commissioning you must rotate the vibrator by hand. Rotation should be flexible, and you can officially start the machine if no jam phenomenon.